Master Bond Product Search

607 products match

EP13 One Part Epoxy System EP13

One component, heat curable epoxy adhesive. Serviceable from -60°F to +500°F. Paste viscosity. High tensile shear and compressive strength. Chemical resistant. Machinable.

EP132 Two Part Epoxy EP132

Two part high temperature resistant epoxy system. Capable of service up to 550°F. 100% reactive. Unmatched durability. Outstanding electrical and physical strength properties. Service operating temperature range from -60°F to +550°F.

EP13LTE One Part Epoxy EP13LTE

One component, heat curable epoxy adhesive. Serviceable from -60°F to +500°F. Paste viscosity. High tensile shear and compressive strength. Chemical resistant. Machinable. Low coefficient of thermal expansion. Meets NASA low outgassing standards.

EP13SPND-2 One Part Heat Cure Epoxy EP13SPND-2

Non-drip single component adhesive. Will not flow when cured. Serviceable up to +500°F. Electrically insulative. Withstands 1000 hours 85°C/85%RH. Excellent bond strength properties.

EP15 One Component Epoxy EP15

No mix compound has exceptional tensile strength properties. Superior dimensional stability. Used for testing the adhesion and/or cohesive strength of flame sprayed coating per ASTM C633. Low shrinkage upon cure. Viscosity 40,000-65,000 cps. Serviceable from -60°F to +250°F.

One Part Epoxy EP15ND-2 EP15ND-2

No mix compound has exceptional tensile strength properties. Superior dimensional stability. Used for testing the adhesion and/or cohesive strength of flame sprayed coating per ASTM C633. Low shrinkage upon cure. Viscosity 40,000-65,000 cps. Serviceable from -60°F to +250°F.

EP17HT One Part Epoxy EP17HT

Serviceable up to 600°F. Exceptional Tg of 220-225°C. No mix formulation. Low exotherm upon curing. Exemplary chemical resistance. Can be used in encapsulations and castings beyond 1/2 inch thickness.

EP17HT-100 One Part Epoxy Compound EP17HT-100

High performance one part epoxy. Good flow properties. Thermally conductive, electrically insulative. Service temperature range -100°F to +500°F. Can be cast in thicknesses up to 1/2 inch. High dimensional stability.

EP17HT-3 One Part Snap Curing Epoxy EP17HT-3

One part snap cure epoxy. Cures in 2-3 minutes at 250-300°F. Service operating temperature range -60°F to +400°F. Ideal for bonding dissimilar substrates and applications subject to thermal cycling. Outstanding electrical insulation properties. Withstands 1000 hours at 85°C/85%RH.

EP17HT-LO One Part Epoxy EP17HT-LO

One part, no mix epoxy meets NASA low outgassing specifications. Serviceable up to 600°F. Tg is 225°C. High shear, tensile and compressive strength properties. Cures in 90-120 minutes at 300F. Withstands 1000 hours 85°C/85% RH.

Seiten