Master Bond EP30LP-2 is a two component epoxy with a low viscosity and a volume resistivity of over 1014 ohm-cm, making it well suited for potting and encapsulation applications. This high performance system can also be used for bonding and sealing.

Formulated for use in demanding thermal management applications, Master Bond EP30TC is a two component epoxy that contains a robust thermally conductive filler with very fine particle sizes. This NASA low outgassing certified system can be used for bonding, coating, sealing and encapsulating for the aerospace, electronic, optical and OEM industries.

Master Bond EP3HTND-2Med Black is a high strength, fast curing epoxy for use in the assembly of medical devices. It fully meets USP Class VI specifications. This one part system delivers superior resistance to a variety of sterilization methods such as chemical sterilants, EtO, radiation and especially autoclaving.

Certified to meet ASTM E595 NASA low outgassing standards, Master Bond EP46HT-2AO Black is well suited for the aerospace, electronic, opto-electronic industries and can be used vacuum environments. This two component system blends thermal stability with a high strength profile for a variety of bonding, sealing and encapsulation applications.

Master Bond X5TC is an elastomeric system that has a thermal conductivity of 10-12 BTU•in/ft2•hr•°F [1.44-1.73 W/m•K] while maintaining solid electrical insulation properties. This one part, no mix adhesive/sealant has a paste-like consistency and is very easy to use. It readily cures in 8-12 hours at room temperature or in 60-90 minutes at 150°F.

Widely used in the electronic, aerospace, optical and specialty OEM industries, Master Bond EP126 excels in high temperature applications up to +600°F. This two component product features unique handling properties as Part A is a moderate viscosity liquid and Part B is a powder. It can be easily mixed using a forgiving 100 to 50 ratio by weight.

Seiten