Master Bond EP4CL-80Med is a one part, optically clear epoxy developed for use in medical device assembly applications.
It withstands repeated sterilization cycles and passes ISO 10993-5 testing for non-cytotoxicity.
This product cures at moderate temperatures of around 80-85°C within 60 to 90 minutes and faster at slightly higher temperatures.

Master Bond EP40ND is a two component epoxy system, designed for bonding, sealing and coating applications.
It is a non-drip, toughened system with an easy to use 1:1 mix ratio by weight or volume. EP40ND meets NASA low outgassing specifications and has a high elongation of 80-90% at 75°F.

Master Bond EP17TF is a one part epoxy with a paste consistency, that can be readily dispensed evenly and uniformly.
It has a moderately high glass transition temperature (Tg) of 150-155°C and a wide service temperature range from -150°F to +550°F.
Designed to compensate for thermal mismatches, this compound resists impact, vibration, shock and rigorous thermal cycling.

Master Bond UV17Med is a one part, no mix, UV curable system. It was specially formulated to provide excellent adhesion to many TPUs (thermoplastic polyurethanes),
which are widely recognized as challenging substrates for bonding. This compound provides very good toughness with a high elongation of 50-60%.
UV17Med passes stringent ISO10993-5 cytotoxicity standards.

Master Bond MasterSil 323 is a two component, addition cured system for bonding, sealing and potting applications.
This product has a convenient to use 1:1 mix ratio, and can be packaged in double barrel cartridges for dispensing from a gun applicator.

Master Bond EP4G-80Med is a one part epoxy designed for use in the assembly of medical devices.
This system is formulated with a non-metallic, graphite filler, which leads to good thermal and electrical conductivity.

Seiten